Update: network Protocol is missing in Windows 10
The said error is often accompanied by the message "The network path was not found", "On this Computer, a network Protocol" or the Code "0x80070035" is missing at least.
- The Problem is primarily the result of a Windows Update in November 2015. In General, it should have been solved by an Update already.
- Therefore, open the Start menu, "settings" and look under "Update and security," according to the latest Updates. Probably this solves your Problem already.
Windows 10: Update
Windows 10: the network diagnostics to start
If an Update has not helped, try the following steps:
- Open the control panel and there you can select the category "network and Internet" from.
- In the "network and sharing center" below the point "fix problems".
- Here you can select the category "network adapter" and follow the instructions.
- Windows searches for problems and attempts to resolve them independently.
Windows 10: the network Protocol is missing
Network Protocol is missing in Windows 10
Also this does not help, you must uninstall the network adapter. Windows installed after a restart again by itself.
- Simultaneously press the keys [Windows] and [R], so that the command "Run" will open.
- Type devmgmt here".msc" and confirm with "OK". Now, the device Manager starts.
- You can open the bottom of the category "network adapters" and click with the right mouse button.
- Select the "Uninstall" Option and confirm the process.
- Repeat these steps for all the available network adapter and start Windows again.
- Tip: Open the command prompt as Administrator and type the command "netsh winsock reset" a.
Windows 10: the network adapter remove
In the next practical tip we show you how to Windows 10 without logging in to start.
