Windows 10: the start of sound change - this is how it works

• Oct 09, 2025
• 903
• 0

The startup sound in Windows 10 you can change with just a few clicks, however, you must turn on this option first. In this tutorial we will show you the individual steps.

Update: the start sound in Windows 10 change

Behind the Scenes Windows 10 is adjusted again and again. Under newer versions of Windows, the following "step 1 does not work anymore". Instead, follow the instructions in this paragraph.

1. Simultaneously press the keys [Windows] and [R], so that the command "Run" will open.
2. Enter "regedit" and confirm with "OK". Now the registry Editor will start.
3. You are here navigate to the following path: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI\BootAnimation
4. Right-click, double-click the entry "disable startup sound" and change the value from "1" to "0".
5. You close the window with "OK" and restart Windows 10. Then, the startup sound should sound, in step 2 you can change.

Step 1: start-up sound on Windows 10 release

The various Sounds under the Windows 10, although easy to change the startup sound, however, is not listed. To do this, you need to turn off the startup sound only:

1. Simultaneously press the keys [Windows] and [R], so that the command "Run" will open.
2. Enter "regedit" and confirm with "OK". Now the registry Editor will start.
3. You are here navigate to the following path: HKEY_CURRENT_USER\AppEvents\event labels\SystemExit
4. Right-click the key "ExcludeFromCPL" with a double click.
5. Change the value from 1 to 0 and close the window with "OK".
6. Repeat the step for the folder "Windows logon". On request, you can also give the Sounds for "WindowsLogoff" and "Windows unlock" free.

Step 2: the start sound in Windows 10 change

Note: even after the implementation of these instructions, no Sound, the problem may be on the quick launch of Windows 10. The startup sound is then ignored. Here we will show you how to use the quick launch of Windows 10 disable.

1. Open the control panel and there you can select the category "Hardware and Sound" from.
2. You click on the "Sound" and switch above to the tab "Sounds".
3. Activate now the Option "Windows startup sound".
4. Now, select the top of the list and select "Windows logon".
5. On the "Browse" Button is now a custom Sound in WAV Format. With the Free Tool format factory to convert MP3 and Video files into WAV.
6. Click on the "OK" Button and restart your Computer to test the sound.

In the next practical tip we show you how to Windows 10 without CD restore.

YOU MAY ALSO LIKE

$Windows.~Bt delete - so, it's simple

• Sun 05, 2025
• 509
• 0

Screenshot under Windows to create

• Sun 05, 2025
• 418
• 0

0 COMMENTS

LEAVE A COMMENT