So you impregnate your rain jacket properly
A rain jacket must also be a strong storm waterproof.
- For this reason, a rain jacket is impregnated. The impregnation can, however, subside with time.
- When it is time for a new impregnation line, you will be able to: Keep a jet of water at the jacket, it should roll off the water and the jacket remain dry.
- The in some Places, is not the case, you must reactivate the impregnation of either or refresh. To Refresh enter the garment for half an hour at a low temperature in the dryer.
- Keeps the jacket after that, the Test still can not stand, impregnating the garment with a spray impregnation.
- To do this, you must have the rain jacket, first wash and dry. Then close all the zips and the jacket on a table. The best thing to do in the Outdoors or in a well-ventilated place.
- Apply the spray impregnation evenly and from a short distance on the jacket and the zippers on.
- Then wait a few minutes, until everything is moved in. Then wipe off excess impregnation with a damp cloth. Leave the jacket in an airy place to dry.
