Wi-Fi Repeater has no connection: noise sources eliminate
- No connection to the Repeater, you should make this closer to the Router. You are trying to establish a connection and move the device back on.
- Especially thick walls made of concrete or metal doors, the radio can interfere with connection between the two devices. You therefore create a clear path.
- Neither next to the Router is still next to the Repeater if there are metallic objects or other operator, such as a telephone. Even a microwave oven interfere with the reception.
Wi-Fi Repeater: No connection
Wi-Fi Repeater set correctly
- Very many wireless networks are in your environment, you should change the wireless channel. The channel is busy, the range. Instructions for the FritzBox can be found in this separate practice tip.
- All this helps nothing, you can put the Repeater back. How this works, read the manual of the device. In the case of the Fritz-repeaters from AVM, press and hold the WPS button for 15 seconds until the lights flash.
- Subsequently, the Repeater is reset. The operation is complete, the device re-set up.
Wi-Fi Repeater to properly use
In the next practical tip we will show you, where the difference between a wireless Repeater and the Access Point is located.
