Hard drive: With CCleaner to tidy up
Windows 7 freezes: Check the hard disk for errors
There may also be a Defect in the Hardware:
- Start the Windows command prompt with Administrator Rights by clicking on "command prompt" under "accessories" in the start menu, right-click and select the Option "run As Administrator" option.
- Enter the command "chkdsk". So your hard drive will be checked during the next system start-up errors.
- In the case of serious problems, we advise you to replace the Fixed bar.
Command prompt in Windows 7
The plug check connections of the hard drive
The previous solution should have been possibilities without success, check whether the connectors of your HDD are properly connected:
- To do this, open your PC and check whether the cable connections are correct. This is not the case, check to see if the connectors are damaged.
- Make sure that the PC is during the Work in the Interior no power supply! Disconnect from the power cable reasons therefore.
Hard Drive: Plug-In Connections
What you can do about it, if the Computer is not properly shut down, read the next tip.
