BIOS reinstall
If your PC has a Hardware device, such as a new graphics card is not properly or even not recognize, usually leads to Reinstallation of the BIOS over. There are several options for the BIOS reset. The following, however, is particularly simple. Caution: Because the BIOS reset to the factory default settings, you must subsequently configure some of the BIOS settings manually.
- Turn off your PC and cut the power supply.
- Open the cover of your PC and remove the BIOS battery. It is the flat button cell is usually located in the center of the motherboard (see image).
- Wait about 10 minutes, to ensure that the System is no Rest-refers to electricity, and the Capacitors are discharged.
- Put the BIOS battery back in, attach the covers and you start up your PC. Since the current was interrupted, forced the System to boot the BIOS from scratch, which fixes the hardware problems usually.
BIOS battery on the motherboard
Problems with the BIOS can also occur when the BIOS battery is broken. In the next article, we will show you how to use the BIOS to change batteries.
