The settings of the FritzBox adjust
In order to be able to use the wireless printer, you must enable the DHCP Server in the FritzBox.
- Call the user interface of the FritzBox by entering in the address line of your Browser "http://fritz.box/". Log in with your password.
- Select the item "System" and then "view".
- So you can see the entry to Enable the DHCP server, you must enable the "Advanced view". Confirm the selection with a click on the button"".
- Then, select the "home network" and navigate to the sub-item "network".
- Click on the "network settings" and select the Option "IPv4 addresses".
- Now you can put a hook in the DHCP Server. Then, enter a DHCP range (for example, "192.168.178.20" to "192.168.178.100"). Click "OK".
DHCP-Server enable
The Wi-Fi printer in the FritzBox to register
Thus, the Wi-Fi printer also gets access to the network, you need to make a few settings in the FritzBox. To do this, go back to the user interface of the FritzBox.
- Select the "Wi-Fi" and click on the "wireless network".
- You put a hook in ", The displayed wireless devices may communicate with each other". Finally, click on "Apply".
The Wi-Fi printer to connect to the network
- You are looking for with your printer according to the name of your wireless network.
- Enter (if necessary) the password. Your printer is now connected to the FritzBox, and can be accessed from other computers in the network.
How to make your network printer in Windows 7 set up, you will learn in this practical tip.
