Light pollution from the Monitor remove
First, you need to turn off your Monitor and disconnect it from the mains. You then have to wait for at least 30 minutes. This enables you to avoid short-circuits.
- Sometimes a handkerchief is enough to get rid of dirt from the Monitor. Make sure, however, that this has no balm layer. As a result, the screen smeared just.
- It will work even better with a micro fiber cloth. Moisten it with a little water and continue without printing on your Monitor. This way, you can also eliminate fingerprints easily.
- You home glasses cleaning cloths, you can also use this for your screen.
Micro-fiber cloths
Rough spots from the screen to eliminate
- Get a micro fiber cloth and a TFT cleaner. You then spray the cleaner on the microfiber cloth and wipe with light pressure to the Monitor. Repeat this procedure until the dirt has dissolved.
- Thus, even the corners and crevices are clean, you can use a brush. Make sure that the bristles are too hard. Are suitable, for example, a marten-hair brush.
TFT-cleaner to clean the Monitor
You should not do this to your Monitor
Even if you think it is just Due to careless cleaning actions, you can damage your screen in a sustainable way.
- Soak the cloth in water. It should only be slightly damp. Otherwise, it may happen that when Cleaning water into the Interior of the screen penetrates, and where short-circuits are caused.
- You spray the cleaner directly on the Monitor. Otherwise it might happen that the protective layer is attacked severely and the image is bad.
- Do not use window cleaner, or a detergent. Window smeared cleaner the screen rather than the it cleans and with to much detergent, you can injure quickly, the coating of the monitor.
You have cleaned your monitors, you can also provide for the right light, and your window cleaning. In another article, you can find a tutorial on how to make your Windows streak-free cleaning.
In order for your Monitor to permanently remain clean, you can it with the Nano-technology seal.
