Loose contact of the headphone connector: Problem to narrow down
First, the Problem should be narrowed down - maybe not a wiggle is a contact on the headphone socket, but a Problem with the cable or the connector of the headphones.
- You can test whether the Problem also occurs for listeners with other head.
- Alternatively, you can test the headphones on another device.
Loose contact of the headphone?
Possible causes for the loose contact
If, in fact, a loose connection is present, contact of the headphone Jack, it can have various causes.
- Often has accumulated in the headphone Jack of the dust, which is blocking the contacts. This can happen, for example, if the device is often worn without cover in the pocket.
- May be a fall of the device has damaged the socket. This usually manifests itself by a slight Wiggle.
- Also, the inlet water can damage the contacts in the socket.
Dirt in the Aux-In connector: to clean the headphone Jack
Two methods can help to Fix a loose contact. Please make sure you are careful with the unit to deal more damage and to not jeopardize potential warranty claims.
- To turn a with a protective layer coated paperclip and insert it carefully into the socket. Then turn and wiggle it and move the dust in a lump from the Opening.
- In order to eliminate stubborn stains, you can use special contact spray. You spray a small amount in the socket and turn the unit off immediately to the head. Wait until the socket is dry before you test it.
- If the Problem is not a pollution, helps only a professional repair.
In order to avoid problems with loose contacts out of the way, you can use Bluetooth headphones. The best models you will find in this practical tip.
