So you vent your heater properly
To be able to your heating system properly bleed the system, first you need a bowl, a towel, and a square key or a tube pump pliers - depending on what to have for heating. Then, proceed to the following steps.
- Place a towel below the valve to out flowing water can be collected.
- Take the square key or the pliers and remove the valve carefully. You turn the heating on the highest level 5 and keep a bowl under the valve. You can possibly help.
- If you wait, you will hear a hiss. This is the case, also the air flows of your heating and bleed them.
- It is normal, if in the process, a little water runs out of the valve. For this reason, you should keep the bowl ready.
- At some point the air has escaped from the heater and hear no hiss anymore. Now only water from the heating also runs.
- This state is reached, take the four Allen key or pliers and turn the valve hand-tight.
- You can then use your heating again, as usual.
Heating venting properly
With the right gas supplier you can save on gas prices enormously. Here you will find the best gas supplier in comparison!
How to make your heating via a Smartphone can learn in the next practical tip. In a further article we tell how to make your heating painting. How to use the Thermostat of your heating Unscrew, we will show you here.
