Surveillance camera with a Fritzbox to connect and use – so it goes
- Open the "fritz.box" in your Browser, and enter the stored password if you have one set.
- Then, navigate to the "home network" > "home network overview" > "network settings" > "IPv4 addresses" and activate the DHCP Server.
- You activate the DHCP-Server in addition, in the monitoring camera. In the owner's manual tells you how to do this.
- Connect the surveillance camera either by LAN or WLAN to the Fritzbox.
- You want to also from the outside on the surveillance camera access, specify the Ports in the Fritzbox free.
- In addition, you must enter the IP address of the camera, which can be found in the overview page of the Fritz box under "MyFritz".
- Last you need a free MyFritz-account, so you using the Myfritz-side to the camera can access.
Fritzbox: surveillance camera use
Read in the next practice tip, as a hard drive on the Fritzbox to connect can.
