Home Blog Archive Hardware Connect Box to reset - how to

Connect Box to reset - how to

  • Oct 07, 2025
  • 640
  • 0

Your Connect Box makes problems, you can reset the Router to the factory settings. We will show you step by step how to do this.

Connect Box: the Router is reset to factory settings

On the back of the router find a small hole labeled "Reset". Press here is a clip for about five seconds, it will set the Router back. Alternatively, follow these instructions:
  1. Open your web Browser with the IP address 192.168.0.1 and log in with your password.
  2. On the left, select the category "Advanced settings" and then select the Option "restore & reboot".
  3. Click below on the Button "restore factory settings" and confirm the process.
  4. The Router will now reboot and deletes all the settings. After a few minutes, the device is accessible again.
  5. Note: According to the manufacturer, it can take 5 to 30 minutes, until the Router is accessible again.
Read now on the next page, as you old Router to be useful.

YOU MAY ALSO LIKE

0 COMMENTS

LEAVE A COMMENT

Human?
1 + 3 =