Home Blog Archive Android Galaxy S4: Branding remove

Galaxy S4: Branding remove

  • Jan 21, 2026
  • 587
  • 0

You do not want to constantly see the Logo of your cellular service provider when you Start your Galaxy S4, you can remove the Branding. So, you can.

Step 1: preparations to Remove the branding on the Galaxy S4

The Branding is to remove your Smartphone flash. As the Jailbreak of iPhones this can pose a procedure a certain amount of risk. As you dig deeper into the System of your smartphone, you can make in case of damage, hardly any more of your warranty rights.
  1. First of all, you need the appropriate Firmware to your Galaxy S4. These can be found on the website of SamMobile.
  2. Download now the free program Odin3 , download and install it on your Computer.
  3. To start the program, right-click on the corresponding Icon on your Desktop. In the context menu choose the Option "run As Administrator".
  4. The program is started, click approximately in the middle on the Button "PDA". Then, select the Firmware and open it. The Firmware detect it in case of doubt, to the file extension ".tar.md5".
  5. A detailed guide to Odin inclusive Video can be found here.
Odin: Galaxy S4 Branding remove

Step 2: Galaxy S4 in Download mode

So that you can work with Odin, you need to put your Smartphone into Download mode.
  1. Turn off the Galaxy S4 completely. If the phone is really turned off, you will notice the short Vibration and the Display is off.
  2. Now press simultaneously the keys "volume down", the "Home Button" and the "Power Button". Press and hold all three keys until on the screen a warning will appear.
  3. Confirm the warning by pressing, briefly press the "volume up".
Galaxy S4 Download Mode

Step 3: Odin and Galaxy S4 connect

  1. Connect the Smartphone via USB cable to your Computer and wait until Odin detects the device.
  2. In the field "IP:COM" should now the value of "x:[COMx]", and under "Message", the entry " Added!!".
  3. Click the bottom right of the window, click the "Start"Button. The process is completed, report back to Odin "PASS".
  4. Your Smartphone will now reboot. You drive it for the next step, however, back down.

Step 4: Galaxy S4 in Recovery mode, and Branding removal

  1. Now press simultaneously the keys "volume up", the "Home Button" and the "Power Button". Press and hold all three keys until on the screen the Samsung Logo appears.
  2. Wait a Moment, until the Recovery Mode is fully charged and you are in the main menu.
  3. Navigate with the button "volume down" to the point "wipe data/factory reset"and confirm your selection with the "Power-Button".
  4. You go with the button "volume down" to the point "Yes - delete all user data" and confirm again with the "Power-Button".
  5. Wait a Moment and select the Option "wipe cache partition". The Galaxy S4 will restart, and is exempt from the Branding.
For more information about how to Remove branding on Android Smartphones, we give you in this practical tip. We also go into more detail on the question of how it behaves in the same way with the manufacturer warranty.

YOU MAY ALSO LIKE

0 COMMENTS

LEAVE A COMMENT

Human?
1 + 3 =