No Internet access in Windows 10 – what to do?
With the following tips, you have fast access to the Internet on Windows 10:
- You can use a LAN connection, you should first make sure that the LAN cable is correctly connected to the PC and to the Router.
- Also, this cable may not be damaged or broken. This is the case, you should replace it as soon as possible.
- You want to connect to the PC via Wi-Fi, make sure Wi-Fi is enabled both on your PC as well as on the Router.
- The PC cannot find the Router via WLAN, so the Router is either too far away or the Wi-Fi access there is disabled.
- In the case of the connection via Wi-Fi, you should make sure that you are using the correct network key for the network.
- In some cases, anti-virus system or Firewall can block the connection to the Internet. Therefore, you can disable both services for a short time, to test the.
- Sometimes it can help when you disconnect the Router for about 10 seconds from the power supply and then restart the PC.
Windows 10: No Internet Access
Other solution: VPN disrupts Internet access in Windows 10
May be a non-supported VPN Software is responsible for ensuring that you have no Internet:
- Right click on "Start" and select "command prompt".
- Enter the command "netcfg –s n" and confirm with [Enter].
- You will get a list with all network protocols, drivers and services. Here, search for the entry "DNI_DNE".
- This is listed, enter the following command in the command prompt:
- "reg delete HKCR\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3} /va /f netcfg -v -u dni_dne"
- Confirm again with [Enter].
- You receive after entering an error message, you need to delete the key manually. Type in "Run" and "regedit" to open registry Editor.
- Navigate to the key " HKEY_CLASSES_ROOT\CLSID\{988248f3-a1ad-49bf-9170-676cbbc36ba3}" and delete it. Then restart the PC.
Here you can find the best DSL provider in the comparison.
You will learn in the next practice tip on how you Wi-Fi issues in Windows 10 how to fix can.
