Wi-Fi faster by receiving improvement
If your Wi-Fi is slow, is usually a poor reception fault. This can be improved by a few simple Tricks. Whether with a homemade Wi-Fi amplifier or by a repositioning of the router - there are many ways:
- If your Wi-Fi reception is fundamentally bad, you should change the location of the router. The best position and located it centrally in the apartment and as far as possible to the top. Also, make sure that, in addition to the Router has no thick metal or other sources of interference are.
- Your microwave you should have, as far as possible away from the Router. In this article we give a detailed Overview of how to use the optimum Router location in their apartment.
- But it can also be the case that the Position of the router is good and you simply have too many sources of interference in the vicinity. Then you need to try to remove all Bluetooth devices, microwaves, water tank (or lines), and other metal objects from the vicinity of your router.
- You may need to buy a Repeater and install it, in order to increase the range of your router and boost the Signal. The best tips to Improve your reach read in this article.
- The reception to improve, you can but also just a Wi-Fi amplifier you can build yourself. For this you just need a piece of aluminum foil, a sheet of paper, glue and scissors. If you have the so-called "Blind Spots", this can be the remedy. Blind Spots are Places where the Wi-Fi is particularly slow or not available.
The location of the router plays for quick Wi-Fi, a large role
Wi-Fi faster make settings in the Router
If the reception has been improved and the range is optimized, you can get from the settings of your router also have a lot of speed out:
- Should you live in a densely populated residential area, it may be that there are many Wi-Fi networks. Most of them work with the 2.4 GHz Standard, and sparks on this frequency.
- But from a certain number of Wi-Fi networks is critical as they begin to overlap. In this case, it may be worthwhile to switch to the 5GHz Band. What exactly is the difference between 2.4 Ghz and 5GHz, we show you in this article.
- If you have connected many new devices to your wireless network, you can try to change your encryption from WPA2 to WPA2-AES. WPA2 can, in fact, slow down the Wi-Fi Standard 802.11 n with WPA2-AES, this is no longer the case. But the requirement is that all devices support your network this encryption.
New Router can help
Wi-Fi to make it faster with two networks
If your Router has mastered the 2.4 GHz Standard as well as the 5 GHz Standard, you should use the 5 GHz network as much as possible. This works but only really, if you give the 5 GHz network a separate name.
- If your 2.4 GHz and 5 GHz network with the same name, do not know the terminal device that the 5GHz network. Under the circumstances, you remain on the 2.4 GHz network hang.
- You go into the settings of your router and search for the menu point "radio network" or "Wi-Fi". Then select your 5 GHz network, and give this a new name.
- It is recommended that the name of the 5 GHz network, "_5GHz" or Similar to attach. Then the full Name would be MeinNetzwerk_5GHz for example, "" for the 5 GHz network, and only the "my network" for the 2.4 GHz network.
- Now you need to delete the 2.4 GHz network from their devices, and this with the 5 GHz network to connect. Then, the devices will login in the future, always in the fast Wi-Fi.
@pixabay.com Quick Wi-Fi at home
To our best list of the latest Wi-Fi routers you can get.
