Home Blog Archive Internet Night circuit in the Fritzbox enable

Night circuit in the Fritzbox enable

  • Sep 10, 2025
  • 1256
  • 0

You activate the night mode in the Fritz box, you can control both the activity of the Wi-Fi, as well as the phone. We will show you how you can enable the night service and configure it.

Wi-Fi control by night control via the Fritzbox

  1. Open the user interface fritz.box and enter your password.
  2. Click left in the menu under "System" on the "night circuit". Here, you can set it for Wi-Fi.
  3. With the top-hook, you activate the night mode. Below, you can choose whether the Wi-Fi should only be turned off if no device is more associated with him, whether the Wi-Fi is disabled every day at certain times, or whether you want to make for each day of the week individual settings (see image).
  4. Select the last point, you can adjust in the graphic below, to the times of the week on which the Wi - Fi on and off should be.
  5. Then click "Apply" and your settings will be saved.
Wi-Fi over night circuit

Do not disturb in the Fritz box set

  1. Open the user interface fritz.box and enter your password.
  2. Click left in the menu under "System" on the "Net connection" and you select the top tab "do not disturb".
  3. You set the hook, before the "do not disturb enabled" and enter the desired time of the day, in the you should you not reach (see image).
  4. Then click on the Button "Apply" to save the settings.
Do not disturb in the Fritz box
In this practice tip , you will learn how to use the parental control in the Fritz box to activate and thus access to the Internet for their children at certain times to turn on and off.

YOU MAY ALSO LIKE

0 COMMENTS

LEAVE A COMMENT

Human?
1 + 3 =