Home Blog Archive Hardware Washing machine moves during the Spin cycle, you can do

Washing machine moves during the Spin cycle, you can do

  • Jan 30, 2026
  • 591
  • 0

Moves your washing machine during the Spin cycle, the problem may be both on the surface, incorrect adjustment, or is Defective. We will show you how you can get a grip on the Problem.

Why wanders to the washing machine during the Spin cycle?

  • If a washing machine is wandering, this is what happens usually only during the Spin cycle. In rare cases, it also moves in the normal washing process.
  • The reason for Hiking the unbalance generated in the drum during the Spin cycle is. The empty drum is rotated at about 800 Revolutions per Minute, should not wobble in the washing machine.
  • During the washing process, the water and the Laundry are still in the drum. Since these are not distributed 100 percent equally, it creates an unbalance.
  • During the Spin cycle the water is to be transported with the aid of the centrifugal force from the Laundry out. In the process, 5 kg of Laundry to develop, however, an effect of 25 kg and more, to wander so that even a very stable washing machine starts.
  • Note: Wanders the washing machine in a precarious extent, and not help you the following tips & Tricks may have a Defect. This can occur in various components.
The spin cycle, the washing machine moves

Washing machine moves: releasing the transportation lock

  • Within the washer is a stone or concrete plate serves as a movable counterweight. The walking of the washing machine should therefore be in the best of cases prevented.
  • Since this plate is movable, it is secured for Transport. Check with the help of the user manual, whether the plate is attached to the transport lock still.

Correct orientation of the washing machine Hiking prevents

  • Thus, the washing machine does not move during the Spin cycle, it must be completely straight. Only in this way, the concept of the stone plate to go. Here is a water balance can help.
  • Place the level on the machine and check the alignment in both the width and the depth. The feet of the washing machine usually just in and out of the turn.
Washing machine aligning properly

Washing machine moves during the Spin cycle: The right Foundation

  • Often the surface is to blame. This is too soft or too hard, can have a negative impact on the washing machine.
  • At the hardware store, you can find stable plates or soft rubber mats for easy suspension. Both of these can help.
In the next practical tip we will show you how to use your washing machine to properly clean.

YOU MAY ALSO LIKE

0 COMMENTS

LEAVE A COMMENT

Human?
1 + 3 =