How to clean projector filters properly
Before you go to work, you should disconnect the projector from the power. You have used the projector just waiting for you with the cleaning of the Filter necessarily, until the device is completely cooled down.
- First, you should engage with long straws, chopsticks or the like. This is not to stick it between the fan, so it will not move wildly back and forth, and possibly damage.
- A possibility of the Filter of the Home-entertainment of dust free with compressed air. Compressed air spray you can get relatively inexpensive, starting at around 3 euros.
- Together with a vacuum cleaner set to the lowest level, you can see the dirt, the blow to one side with the compressed air to spray out the other side again one eyes. So you don't prevent them from distributing with the air spray dust further in to the projector.
- You should have a compressor, you can use the instead of a compressed air spray.
- The most efficient method of filter cleaning, however cleaning with water. To do this, remove the Filter carefully from the cover and clean it afterwards with lukewarm water and only with water, without any detergent. Insert the Filter into the projector when it is completely dry.
Multimedia experience thanks to projectors
Is the projector Filter clean as a whistle, but the lamp passed slowly, see the practice tip "New projector-lamp-install – need to make sure" some good tips.
