Power SW on the motherboard to connect – so go ahead
- Turn off the Computer and remove all cables.
- Wait about 5 minutes, until all electrical power is dissipated.
- Do not open the casing of the PC, so that you can look into the Interior and on the motherboard.
- Rotate the PC so that you can read the writing on the Mainboard.
- Mostly in the lower-right corner, you will find several small ports (see picture).
- Connect to the fifth port of the right of the Power SW connection, so that it is firmly seated.
- Press and hold on the motherboard look for a small connector, including PWRSW is "".
Power SW connect to the motherboard
For more info on how to get your Mainboard correctly, we will give you in the next tip.
