Motherboard properly clean
- To the point: boards are primarily functional. Clean your Mainboard only, if dust gets out of hand, or other contaminants threaten to impair the ability to run your computer or to compromise.
- Before you clean your motherboard, remove the power plug and open your computer case carefully.
- Remove the button cell, so the motherboard battery.
- Now, you can easy to dust using a compressed air spray from the motherboard to blow
- Pat more severe dirt by using an anti-static cloth.
- Hard-to-reach Places you can reach with cotton swabs. Here, too, not RUB, but DAB it, otherwise the fibres of solder joints, corners and edges can get stuck.
- Contaminated slots you can remove gently with a toothpick of dirt.
- To clean glued surfaces, soak a cloth or cotton swab in distilled water or alcohol. Let the liquid until fully evaporate before connecting the battery and power back on.
Latest Videos
The most important cleaning utensils are an anti-static cleaning cloth, cotton swabs and distilled water or rubbing alcohol. With toothpicks, you get dirt out of grooves.
The most important cleaning utensils are an anti-static cleaning cloth, cotton swabs and distilled water or rubbing alcohol. With toothpicks, you get dirt out of grooves.
On your motherboard, virtually all of the computer components such as power supply, video card, sound card, memory, and hard drive are connected directly on slots, or indirectly via a cable. It is best to go in advance a couple of photos of your Mainboard, so that you can later build all error-free again.
On your motherboard, virtually all of the computer components such as power supply, video card, sound card, memory, and hard drive are connected directly on slots, or indirectly via a cable. It is best to go in advance a couple of photos of your Mainboard, so that you can later build all error-free again.
You don't trust the motherboard to expand, you should remove at least the battery, before you begin the cleaning.
You don't trust the motherboard to expand, you should remove at least the battery, before you begin the cleaning.
Easier you can get to all parts of the motherboard, if you are unplugging all of the components and the motherboard, remove by loosening the screws in all four corners. Attention: the boards have spacers that hold the metal housing remote. Back mount the motherboard without standoffs in the case.
Easier you can get to all parts of the motherboard, if you are unplugging all of the components and the motherboard, remove by loosening the screws in all four corners. Attention: the boards have spacers that hold the metal housing remote. Back mount the motherboard without standoffs in the case.
