HP printer cartridges change so it goes

The print cartridges of your HP printer are empty, you must change the cartridge before the next printing. We will show you how the exchange works.

HP: printer cartridges from the ink-jet printer switch

Note: Every printer is built differently, so also in the case of HP. The basic procedure is similar, however, so it should hardly differ.

Turn the printer on and locate the access to the cartridges. To do this, open the upper part of the printer, or the small flap on the front.
Wait until the cartridges in the correct Position to have the dangers. This is always marked. Only if the cartridges are for several seconds in this Position, the engagement secure.
You can now remove the old cartridge by the click mechanism, and carefully dispose of it. Not that the color gets on your hands or on your clothes.
You can then use the new cartridges. The little Chip on the cartridge is usually covered with a foil, which you must remove. All cartridges are in place, close the printer. The cartridges are well tested and are then ready for use.

First, open the printer. The procedure is usually relatively simple, the knob or the handle are located in various Places.
You have found the toner cartridge, you can drag this out. A complicated mechanism is not used in the rule.
Unpack the new Toner and replace it. Close the door and turn on the printer. Then can be re-printed.
Tap: Put the old Toner directly into the packaging from the new Toner. So the colour can't leak and trouble spots cause.

In the next practical tip we will show you how to use the print head from the HP-cleaning the printer.