Case modding tip 1: The right Case
If you are from the beginning with a high-quality housing to work, you can prevent problems and their possibilities for Expansion are enormous. Because no matter how good you are in Crafting, without the right Case, you quickly come to their limits when case modding.
- It's Best to purchase a high-quality housing with a good expansion brings opportunities. A good selection of such Enclosures you will find here in our price comparison. You can then decide whether you want to have a side window or not.
- If you ever have a water cooling system to install to, make sure that at least 2x240mm recesses for radiators, are available. Because so much space you should plan for CPU+GPU at least.
High-quality case is worth
Case modding tip 2: cable sleeving
With the sleeving of their cables, you can pick the eye out and also your cable management. Therefore, this should definitely be one of the first steps.
- Meanwhile, there is a large range of Sleeves in all sorts of colors and combinations. After a short break-in time, you will have the hang of it and can create impressive cable.
- If you are the owner of a good enclosure that is located behind the motherboard Tray, a second rear wall. Behind this you can store the cable and to the Interior of your PC clean up. In addition, you improve the Airflow in your enclosure, because the cables no longer hang in the air flow.
Cable with Sleeve are really smart
Case modding tip 3: Own Cover for the power supply to create
Since the power supply is not exactly the most Beautiful on the PC, you can build a custom Cover for it. In order to hide the cable mess at the bottom of the housing and can at the same time engrave something like the individual Logos on the Cover.
- It is best to start with a piece of cardboard from a carton or the Like. This cut until it fits reasonable. In this piece of cardboard you can draw then your own engraving or cutting.
- With your template then go to a local Metal shop and the Cover made of metal can be made. The cost would be mostly in bounds and 100€ should not exceed.
Cable hiding made easy!
Case modding tip 4: water cooling install
With a water-cooling system keep your PC cool and quiet, but also visually the most out of get. In the case of a self-built water cooling your imagination has no limits and you decide at each step what components you want to install and which versions.
- The water cooling system gives you the possibility to customize the Interior of your PC completely to your Liking. No matter whether you want to have a Matt black Look, colorful paint joy, or copper tubes, with a little imagination, anything is possible. In our Workshop, water-cooling we will show you how you can successfully the project master can.
- Completely self-built water cooling systems that cool the processor and graphics card, can quickly cost 400-500€. For qualitative components, but also for a few years. If you are in the topic of water-cooling the coach, you can consider a Aio water cooling system to buy. This looks great, cools well, is pre-installed and need no maintenance.
Whisper-quiet water-cooling
Case modding tip 5: The last stage
To mod the entire case to a specific topic, is likely to be the hardest challenge. As a reward there is, however, a unique housing which exactly matches their ideas.
- Modding the entire housing, you should possess a metal tool. These are, for example, a Dremel and protective glasses, a metal pair of scissors and tool for measurement. Best to make the painting of metal familiar. You finished in front of the work, many detail sketches to rich. Because a faulty grip on the casing could mean that you need to buy a New one.
- If you don't mind, to take a little longer for the Modding, you can try to build a private housing. To do this, you should be well versed in 3D modeling, neat fantasy, and about the components of a PC know. A Lot Of Success!
Case modding taken to the extreme
See you in the next article 22-to-date and chic case modsfor your personal project inspired a little to let.
