Tinkers Construct - Hammer manufacture
- Higher removal speed and larger removal area (9 blocks instead of 1) are the two things that make the Hammer so special. Here you will learn what materials you need for the ultimate tool.
- The basis of 3 different Stencils (the stencils), you finished in the Stencil Table. The "Large Plate Pattern", the "Hammer Head Pattern" and the "Tough Rod Pattern".
- Now you can open the Part Builder and fill the just created templates for raw materials. Depending on which substance you take, varies the efficiency of the tool. Do not forget that you will need the "Large Plate Pattern" twice, to build the Hammer.
- Wood has, in this respect, the worst properties. If you want to have an exceptionally good Hammer, you're advised with the ore in Cobalt is good.
- The next work bench that you need is to Forge the Tool. This is the last Station of the production. From the left pane, select the recipe of the hammer. In the middle of a construction situation appears to be now. Arrange the gecrafteten elements now proposed (see also: the picture on the right).
- Remove the good piece of work bench and get started. The next Mine's probably waiting on you.
Tinkers Construct - Hammer build
On the next page, you will learn how to make your own melt into Tinkers Construct to build can.
