Mobile phone charger to Dynamo and to connect these models, there's
- The "USB - factory AC" of the "Busch & Müller" is very small and thus can be used anywhere on the bike mount. Also matching storage and cable systems are available with multiple consumers can connect.
- More comfort is offered by the "Dynamo Harvester" with built-in rechargeable battery and plenty of accessories. He optimized the hub Dynamo, so that its power is used to the best effect. The Dynamo Harvester also has Bluetooth. With the accompanying App "Be on Bike" you will also receive information about the current altitude, elevation, calories burned, and much more.
- At the simplest, the "Kemo Bicycle Dynamo the charge controller" , therefore, is simply between the Dynamo and a bike lamp is switched of. The disadvantage is that you can only charge either the phone or light.
So connect the charge controller
- First attach the charge controller to your bike. Depending on the model of the device is fixed either with Clamps or cable ties on the frame of your bike.
- Now you need to connect the charging controller with the Dynamo. Load devices, such as the "Dynamo Harvester" have a connector that fits exactly to the connection of most hub dynamos.
- Finally, you should attach all the cable to the frame of your bike, that you can't go anywhere in the wheel. It is best to use cable ties. In the case of more expensive charge controllers suitable fastening material is supplied is the same.
If you are in order to Connect the charge controller to your Dynamo not sure, you should consult a qualified Bicycle mechanic for help.
You want to a new Bicycle light to your bike build, helps you the Chip, Bicycle lamp test, on.
