TP Link M5350 – set so it works
- First remove carefully the cover of the router and take out the battery.
- Insert the SIM card and insert the battery again. You then close the cover.
- Press and hold the [Power] button until the Display shows "TP Link" is.
- You are looking at your PC in the Wi-Fi network to the Router. The full name as well as the Wi-Fi password can be found on the bottom of the TP Link.
- Establish a wireless connection with the Router and open the page "192.168.0.1" in your Browser.
- Enter the user name and password is both "admin" and click on "Log in".
- To start the setup, click on "Wizard" and then select the bottom right "Next".
- In the next step, you must enter the connection data from the SIM card, so that an Internet connection can be established. Confirm with "Next".
- You can then customize the wireless settings, or you leave. With "Next" to confirm.
- Finally, you will see a summary, which you confirm with "Finish". After the setup is complete.
TP Link M5350 setup
Read in our next practice tip on how to use the TP Link to change the password can.
