Two phones to a telephone socket in parallel
- The parallel Switching of two TAE-cans is relatively simple, however, not in the sense of the operator. In the case of a call, both phones ringing pick up the receiver on the other phone, the phone call to listen in.
- This option is only useful if the potential interception is not a Problem. The connection is quite simple: The first telephone socket is connected to terminal 1 and 2 with the trunk line. Simply plug an additional cable to terminal 1 and 2 and connect them to the terminals 1 and 2 of the second telephone socket.
- A little easier it comes with a TAE-distribution. The following TAE-distributor of Hama costs about 10 Euro on Amazon. The connection to a TAE socket is therefore divided in two ports. The principle of the Parallel circuit remains the same.
TAE-box: Two phones connecting
TAE-box: Two phones without listening function connect
- A really good solution, unfortunately, just a second, TAE-socket. This, however, is not moved readily, which is why you should to resort to an Alternative: The automatic multi-switch (AMS) enables the connection of two or 4 more devices. Also, here are just a telephone call can be at the same time, however, eavesdropping is not possible.
- The AMS is connected to the first telephone socket. To the AMS then the second TAE is connected to the socket. The first telephone socket can then be connected with a phone - but on the AMS, as well as at the second outlet. You can use a Splitter must be connected to the AMS behind him.
- The first telephone socket is connected to the terminal 1 and 2 with the trunk line. Terminal 5 and 6 will now be connected to the terminal La and Lb from the AMS. Then, you connect the terminals a2 and b2 from the AMS with the terminal 1 and 2 of the second telephone socket.
In the next practical tip we show you how to get the number of a telephone socket to find out.
