Home Blog Archive Hardware Power amplifier bridge that you need to consider

Power amplifier bridge that you need to consider

  • Mar 20, 2024
  • 251
  • 0

Before you can bridge the amplifier, you should consider some points. You read in this practice tip, for what it is.

Power amplifier bridge that you need to consider

  1. First of all check, whether the amplifier is bridged. You can see this on the note "Bridgeable" on the amplifier.
  2. Then take a look at your amplifier. This can have two or four channels. There are different ways to do it.
  3. You have a two channel amplifier, connect the speaker cable to the amplifier. The black cable should be plugged into the last, while the red cable in the first port.
  4. The four-channel amplifier, connect the first speaker with the red cable first and the black cable in the last port of the first block.
  5. The second speaker, you plug in the second Block in the same way as described above.
  6. Should you need further assistance, please contact a retailer. This you should also draw rate, if you're not sure.
Notes: the amplifier bridges
In the next practical tip we will show you how to use your amplifier properly set.

YOU MAY ALSO LIKE

0 COMMENTS

LEAVE A COMMENT

Human?
1 + 3 =