Home Blog Archive Hardware Kobold VR200: Updates

Kobold VR200: Updates

  • Mar 20, 2024
  • 1135
  • 0

In order for the Kobold VR200 robot vacuum provides even better results, developed the Software for the VR200 constantly. The latest Version provides you with Vorwerk on its website free of charge.

Software Update transfer for VR200 on the robot vacuum

On the Website of leprechaun is the latest Version of the Software for the VR200 to Download. This you need to download and on a USB Stick save:
  1. Create on the USB Stick a folder with the name "robot data".
  2. Save the downloaded Update in the folder you just created.
  3. After that, you must open the cover of the suction robot, and on the left side of the protective rubber removed. Here's a Micro-USB port is hidden.
  4. Now plug the supplied USB Adapter into the port and connect the cable to the USB-Stick.
  5. By the way: Many more great tips for Vorkwerk Kobold VR200 can be found on our CHIP-Special-page.
VR200: So you play Updates

Software Update on the robot vacuum install

  1. In the menu "settings" and press "OK".
  2. Then navigate to "Software Update" and confirm again with "OK".
  3. Now you have to select the Update and confirm that you want to install it on the suction robot.
  4. You have to wait now until the Installation is complete. Then you can remove the USB cable, the protective rubber attach and close the cover.
  5. Tip: The currently installed versions of the Software shows you your VR200 in the menu under "Info", > "Revision".
The Kobold VR200 robot vacuum buy now online

YOU MAY ALSO LIKE

0 COMMENTS

LEAVE A COMMENT

Human?
1 + 3 =