Jawbone UP3 Reset: Fitness-Tracker reset via warm start
Before you delete your Jawbone UP3 in the event of problems, you should first try a so-called warm start. Corrects many common problems, but their activity data on the tape. It is, therefore, a kind of Soft Reset.
- First, connect the Jawbone Band with the included charging cable and plug it into the wall outlet or a USB Port.
- As soon as the three Status lights will begin on the tape, to flash alternately, disconnect the charging cable from the power source.
- Then, you connect the charging cable again within five seconds with the power source.
- As a result, all three Status lights will simultaneously flash slowly at first and then faster and faster, until all three lights for 1 second. This process takes about 4 to 5 seconds.
- As soon as the lights flash again alternately, completes the warm start. You can disconnect your Band then on again from the power source and use.
Jawbone UP3 reset
Jawbone UP3: Full Reset
The hot start does not rectify your problem, you can perform a full restart of the Fitness Bands. This is a Reset, which also deletes your settings.
- To do this, connect the Fitness Band with the USB charging cable. Do not plug in the charging cable but still the power source.
- Then press with a bent paperclip, or needle for three seconds the small button on the side of the charging cable.
- Now release the button and plug the charging cable into a power source. Then all the Indicators start to flash symbols of the Jawbone UP3.
- Then, you wait until the Fitness-charged tape completely.
- Disconnect the Fitness Tracker last of the power source, and then synchronize it with your UP App.
As soon as your Jawbone UP3 is working again, you should these Fitness functions it's a must try.
